The electric motor has different parts, of which the bracket is a part. The motor bracket is different depending on whether your motor is aluminum or cast iron .
The electric motor bracket is actually the front or back door of the dynamo, which is connected to the electric motor with at least three or more screws. The electric motor consists of different components, each of which has a special use.
The electric motor bracket is one of the main accessories of the motor , which is designed to protect the motor cover. The motor bracket is actually placed behind the alternator and is responsible for protecting this equipment.
Of course, the electric motor bracket can also be placed in the front part of the dynamo. Depending on the type of alternator, the alternator bracket can be installed in different positions.
Many industrial stores all over Iran sell electric motor brackets, and industrial goods online store is one of these stores. All types of electric motor brackets can be provided along with expert advice on ElectroMotorCom website.
Electric motor components
Electric motors are composed of various components, each of which has an important application in the proper operation of the motor.
An electric motor usually includes a shaft, rotor, bearing , spur, bracket, stator, shell or housing of the electric motor, start capacitor, terminal board, terminal box cover, permanent capacitor, side parts, spring washer, switch, governor, switch protector, cooling fan. And they are butterfly covers.
Each of these parts has a specific use and must be used in its own engine.
In general, the use of electric motors has many advantages. One of the advantages of using electric motors is the desired speed change.
Many industries need an electric motor to rotate the shaft connected to the device at the desired speed to change the rotation speed of the connected device.
Another advantage of electric motors is their easy operation. Most combustion and breathing engines have a much more complicated function and how to work with them is not easy.
Electric motors have a very easy structure and thus their maintenance cost is also economical.
Electric motors have a longer lifespan than other motors. One of the reasons for the longer life of electric motors is their very low wear and tear. Electric motors are more efficient than other motors.
Along with these advantages, electric motors also have disadvantages. These motors usually have a lot of weight and strong bases should be used during installation. The type of input current to the electric motor must be compatible with the type of motor.
For extensive changes in the output of the electric motor, a device called a variable frequency drive should be used.
The quality of electric motor accessories has a direct effect on the efficiency of the electric motor. For example, the Motogen bracket is one of the highest quality brackets available in the market.
Also, Motogen’s new bracket has an optimal design and a stronger sex, which is suitable for heavy industrial applications.
You should get the electric motor bracket from a reputable electric motor bracket dealer because there are many counterfeits of this equipment.
The electric motor bracket can be installed on both front and rear sides of a dynamo. Depending on the motor model, the motor bracket can include grooves to help cool the motor better.
When installing the electric motor, it is better to place the electric motor bracket on the side of the outer space so that proper heat transfer takes place in the motor compartment. For this reason, it is better not to place the electric motor bracket in a tight space without ventilation.
Preferably, leave the back of the electric motor bracket completely open or place it in a space that has a channel to the outside environment.
Advantages of using the electric motor bracket
The electric motor bracket is a protective device for electric motors. The electric motor bracket can be made of aluminum or cast iron, which can be changed according to the user’s needs.
In addition to protecting the motor and preventing dust from entering the motor compartment, the electric motor bracket has other advantages. The electric motor bracket has grooves through which air passes.
This air inside the engine compartment causes heat transfer from the cold environment to the hot environment. This function can help the electric motor propeller to perform the cooling operation in better conditions. The electric motor bracket is usually installed with screws or rivets to the motor housing.
Some electric motors that are not usable can be opened by a specialist and the parts can be used in other electric motors. The electric motor bracket is one of the parts that can be removed from second class motors and installed on new motors.
When the electric motor bracket fails, there are two ways to replace it.
In the first method, the bracket itself can be repaired and reinstalled. In the second method, the dimensions of the electric motor bracket can be obtained and it can be manufactured. Of course, the second method is usually much longer and more expensive.
Also, using brackets of similar models is another solution that should be applied according to the expert’s opinion. Before doing any repair in electric motors, it is better to share its details with an expert and get the necessary advice.
Electric motor bracket selection guide
The most important factors in choosing an electric motor bracket are the size and type of metal used in making the bracket. The brackets are usually connected to the housing through screws, and it must be ensured that these screws do not wear out the engine parts.
Also, the size of the engine compartment must be exactly proportional to the bracket. Being bigger or smaller can cause the electric motor bracket to not match with the motor shell.
The grooves of the electric motor bracket must be in such a way that they transfer air to the outside and prevent the entry of dust and contaminated dust into the motor.
The electric motor bracket of each brand has unique characteristics. It is better to use special models of the same brand to replace the electric motor bracket.
Considering that some models are very hard to find, it is possible to use the method of manufacturing and reverse engineering the part.
The electric motor bracket must have proper insulation so that the current in the motor does not transfer to the outside space. This insulation helps the current to be present only inside the motor housing.
ElectroMotorCom site is able to provide advice on replacing or making the electric motor bracket .
Stock electric motor bracket
According to its knowledge of the market, ElectroMotorCom Group can prepare your requested electric motor bracket from the market and deliver it to you as soon as possible.
Some types of engines either do not have representatives in Iran or their parts are not available. But there are companies that make parts or stock them as brackets.
Brackets for electric motors have a wide range and variety, but Motogen, Electrogen , and Siemens brackets are among the most popular products in Iran’s electric motor market. The Chinese electric motor bracket is also in great demand.
But considering that all of these have different names, they should be checked each time to see if they are in stock or not?
Making the electric motor bracket
Some customers of industrial goods are looking for an electric motor bracket with a specific brand, while their requested bracket is not available in the market. There are two solutions for these cases.
The first solution is to send the requested bracket sample to the industrial goods group and cast the industrial goods exactly the same as the sent sample. Obviously, this process will be time-consuming and at least 15 to 20 working days are needed.
The second solution is to send the bracket sent by the customer to specialized manufacturers for repair and repair, and after a maximum of 5 working days, the repaired bracket is returned to the customer.
It is obvious that the repair of the electric motor bracket will cost less and increase the speed of the operation. To know the price of the electric motor bracket, contact the sales experts.